Thursday, March 1, 2012

2) Science Of Rain-x


Hydrophobicity:

       Glass is essentially a network of bonded Silicon and Oxygen atoms. Every once in a while there is an exposed OH or hydroxyl group [1]. This hydroxyl group has a strong polarity just like water due to the fact that the oxygen is electronegative. Because the exposed hydroxyl groups are polar just like water, water is actually attracted to these groups. This attraction causes water to stick to glass and spread out instead of rolling off. Rain-X and Aquapel prevent this interaction allowing the water to roll right off. To fully understand how the works though the chemical structures must be examined.

 Rain-x is made of mostly Polydimethylsiloxane (PDMS) [2],[3] as seen below:

[4]

      PDMS is a simple polymer made up of the silicon, oxygen, and carbon containing “methyl” groups. These carbon containing methyl groups make the polymer similar to oils due to the fact that these carbons are non-polar just like the carbons in oil.

       Aquapel, one of the main competitors of rain-x is made of different compound call a fluoroalkylsilane (FAS). The most common FAS is known as FAS17 for the 17 fluorine atoms that it has on it [5]:



       The long chain of Carbon and fluorine’s create a similar non-polar chemical as Rain-X

       The polarity of water causes it to repel substances like oil and Rain-X. When water (like a raindrop) lands on a hydrophobic surface (like a rain-x treated windshield), the water balls up because it repels the hydrophobic surface and collects into a sphere. This sphere is then touching very little of the windshield. This allows the bead of water to run off very easily as compared to normal glass which attracts the water instead.


       To truly measure hydrophobicity a measurement called the contact angle is used. Physical chemistry is able to predict specific quantities [6]. Knowing the contact angle allows physical chemists to predict the “surface tension” of the glass which is the same thing as its hydrophobicity. The contact angle also allows physical chemistry to calculate how easily the drop will slide off of the glass.

[7]


       The more hydrophobic the material, the greater the contact angle, the greater the contact angle the easier the water will slide off. This makes sense because when the water has a large angle, there is less surface “holding” onto the water droplet.

       According to a study by Kamitani [8], PDMS has a smaller sliding angle (which means it slides off easier) but a smaller angle of contact, while current FAS chemicals have a larger contact angle but a larger sliding angle. In this case the discrepancy is due to physical nature of the chemicals. The perfluorocarbon chains interact with the water molecule more causing to stay in place [9]. The lab was also able to design a more effective FAS chemical that matches PDMS. This could possibly be used in the future to create a better windshield repellent.

Adhesion to Glass

       To be able to bind to glass chemicals like FAS must be slightly modified. Oxygen containing group are excellent at binding to glass but only if the oxygen’s are exposed. In the case of FAS, all of the oxygen’s are bound up with carbons and not exposed. To expose these oxygens, the FAS17 monomer is exposed to specific amounts of nitric acid. This nitric acid cleaves the bond between oxygen and carbon allowing the oxygen groups to be exposed [10]. The exposed oxygen then easily binds to the exposed hydroxyl groups on glass. A byproduct of this addition of acid is that the FAS monomers polymerize. Previous research has shown that dimers (two monomers put together) and trimers (three monomers put together) were most effective in bonding to the glass. With more polymerization, the polymer became too bulky to bond to the glass. The scheme below shows the process of activating the FAS chemicals [11]:




       Because FAS is chemically bonded to the glass it is very hard to remove. This allows the compound to stay active on the windshield over a long period of time [8].

     Rain-X contains mostly PDMS [2],[3]. From the example above, PDMS has no possible ways to bind with glass. As with FAS, PDMS can also be activated by acid, which breaks down the polymer. In the case of FAS, dimers and trimers were produced. For PDMS though the polymer is broken down. This still leaves very large bulky groups which do not bind effectively to the glass [5]. Rain-X also has chloroalkylsilanes left over from production. These chemicals have been reported to add to existing polymers to create difference types of polymers some of which are unwanted [12]. This is important because larger polymers make the binding ability even lower [9]. This means that wiper blades can remove PDMS over time, which causes it to lose its effectiveness. This is similar waxes that are applied to cars. As time goes on the waxes are removed by external forces, though this effect is more pronounced with Rain-X due to wiper blades being an almost constant force in rain.

Conclusion

       In conclusion, Rain-X and PDMS based repellents have a greater water repellent effect but a much lower binding ability to glass. Aquapel and FAS based repellents have a greater lifespan but come with sacrificed effectiveness.

References:

[1] Quantitative infrared spectroscopic measurement of hydroxyl concentrations in silica glass http://www.sciencedirect.com/science/article/pii/0022309396003304

[2] Rain-X MSDS https://www2.itap.purdue.edu/msds/docs/7756.pdf

[3] What’s Inside: Rain-X. Better Driving Through Alcohol
http://www.wired.com/magazine/2010/06/st_whatsinside_rainx/

[4] PDMS Repeating Unit http://en.wikipedia.org/wiki/File:PDMS_repeat_unit.png

[5] Water-repellent coating films on glass prepared from hydrolysis and polycondensation reactions of fluoroalkyltrialkoxylsilane http://www.sciencedirect.com/science/article/pii/S0040609001009014

[6] Improvement on Hydrophilic and Hydrophobic Properties of Glass Surface Treated by Nonthermal Plasma Induced by Silent Corona Discharge http://www.springerlink.com/content/w020187756124126/fulltext.pdf

[7] Behaviour of water drops on different surfaces
http://www.nature.com/nmat/journal/v1/n1/fig_tab/nmat715_F1.html

[8] Development of Water-Repellent Glass Improved Water-Sliding Property and Durability http://www.springerlink.com/content/x72674302445h130/fulltext.pdf

[9] Coatings made by sol–gel and chemical nanotechnology http://www.springerlink.com/content/rq2l3h621r111275/fulltext.pdf 

[10] Improvement on Hydrophilic and Hydrophobic Properties of Glass Surface Treated by Nonthermal Plasma Induced by Silent Corona Discharge http://www.sciencedirect.com/science/article/pii/S0040609001009014

[11] Easy-to-clean properties–Just a temporary appearance http://www.sciencedirect.com/science/article/pii/S0040609005011612

[12] Self-Assembly Is Not the Only Reaction Possible between Alkyltrichlorosilanes and Surfaces:  Monomolecular and Oligomeric Covalently Attached Layers of Dichloro- and Trichloroalkylsilanes on Silicon http://pubs.acs.org/doi/abs/10.1021/la000471z


25 comments:

  1. Awesome article! It's interesting to see how polymer chemistry relates to keeping rain from adsorbing on my windshield. I didn't know about that difference between Rain-X and Aquapel either. Personally, I'll stick with Rain-X. It's annoying having to reapply it but I've read elsewhere that the difference in repelling water is noticeable. It doesn't take that long to treat the windshield. But that's just me.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. I think the mistake consumers make is using the wiper blades after applying the silanes. I use a PDMS-based application which lasts through a good 2 or 3 heavy rains (about 3-4 weeks here in Austin) without using the wipers, but it barely lasts 1 week if I use them. Many of my passengers often ask me why my wipers aren't on during rain, and I have to gently explain the lack of need. Until I point it out, they seem not to notice, which is I think a result of wiper-habit and lack of awareness.

    Great article and thanks for sharing your knowledge on the topic.

    ReplyDelete
  4. I think the mistake consumers make is using the wiper blades after applying the silanes. I use a PDMS-based application which lasts through a good 2 or 3 heavy rains (about 3-4 weeks here in Austin) without using the wipers, but it barely lasts 1 week if I use them. Many of my passengers often ask me why my wipers aren't on during rain, and I have to gently explain the lack of need. Until I point it out, they seem not to notice, which is I think a result of wiper-habit and lack of awareness.

    Great article and thanks for sharing your knowledge on the topic.

    ReplyDelete
  5. I really love this post, great information. I am curious, though. Would it be technically possible to apply a polysiloxane rainx ablative layer on top of the aquapel/FAS agent on the windshield? Would you get a more substantial affect, or would the two polymer chains interfere with each other? I'm not well versed enough in the chemical interactions to know if they would cause problems with each other in such a way.

    ReplyDelete
  6. Do you have any products in the US that simply go into the washer reservoir and apply this layer as you wash and wipe? I use MaxGEE in the UK, and it reapplies as you use the wash wipe system so never runs out and is self applying.

    ReplyDelete
  7. I found this blog after a long time which is really helpful to let understand different approaches. I am going to adopt these new point to my career and thankful for this help.
    เล่น forex

    ReplyDelete
  8. Chem Academy offering CSIR NET Online Live Classes for CSIR NET Chemical Science and Physical Science. We also provide CSIR NET online video classes, Recorded Classes and CSIR NET online video lecture for NET Entrance exam. Online Classes for CSIR Net Physical science

    ReplyDelete
  9. Website Development Jaipur

    Digitalopeners website development Jaipur provides best website development services Jaipur , Website Development Company In jaipur Website Development and Software, E-commerce Development, SEO and SMO, Digital Marketing training Jaipur, Rajasthan. We also provide SEO friendly web design & development services and Mobile app development company Jaipur.

    ReplyDelete
  10. Good info. Lucky me I ran across your site by accident (stumbleupon). I've book marked it for later!
    kệ tivi gỗ

    ReplyDelete
  11. Aw, this was a really nice post. Spending some time and actual effort to generate a really good article� but what can I say� I put things off a whole lot and don't seem to get anything done.
    forex la gi

    ReplyDelete
  12. Good info. Lucky me I ran across your site by accident . I've book marked it for later!
    Danh Gia San Exness

    ReplyDelete
  13. Infinox โบรกเกอร์ Forex ผู้ให้บริการแพลตฟอร์มการเทรดสกุลเงิน mt4 xauusd ฟอเร็กซ์ ดัชนีหุ้น ทองคำ น้ำมันดิบ ฯลฯ ให้บริการลูกค้าไปแล้วหลายประเทศทั่วโลก

    ทำไมถึงเทรดกราฟ Forex mt4 กับโบรกเกอร์ Infinox
    ตลาด Forex เป็นตลาดการเงินที่ใหญ่ที่สุดในโลก xauusd ฟอเร็กซ์ ดัชนีหุ้น น้ำมันดิบ สามารถทำการซื้อขายได้ทั้งขาขึ้นและขาลงตลอด24ชั่วโมง โอกาสในการซื้อขายยิ่งมาก โอกาสในการทำกำไรก็ยิ่งมาก

    Forex
    mt4
    xauusd
    ข่าว forex
    น้ำมันดิบ

    https://www.infinox.co.th/forex/
    https://www.infinox.co.th

    ReplyDelete
  14. If you are carrying our a chemistry or chemical or organic chemistry research and need research chemicals for your projects, you can get some from Effective Research Chemicals Lab from China. They have been of help to many students in the past. You can also
    Buy PMK Oil online
    Buy Pmk glycidate online
    pmk powder
    effectiveresearchchemicals.com

    ReplyDelete
  15. MBBS admission Consultants in Jaipur. We provide personalized assistance in building a bright future for you through perfect counseling and well-researched guidance on every aspect of your future. Currently, we hold more than 5 International branches having more than 50 centers around the globe.

    ReplyDelete
  16. Thanks for sharing such a piece of useful information among us. keep sharing this kind of information. For more information, you can visit this site- Treatmented Glass both sides

    ReplyDelete
  17. https://alwady-clean.com/#:~:text=%D8%AC%D9%85%D9%8A%D8%B9%20%D8%A7%D9%84%D8%AE%D8%AF%D9%85%D8%A7%D8%AA-,%D8%B4%D8%B1%D9%83%D8%A9%20%D8%AA%D9%86%D8%B8%D9%8A%D9%81%20%D9%85%D8%AC%D8%A7%D9%84%D8%B3%20%D8%A8%D8%A7%D9%84%D8%B1%D9%8A%D8%A7%D8%B6,1%2C060,-%D8%A3%D8%AE%D8%A8%D8%A7%D8%B1%20%D9%81%D9%8A%20%D8%B5%D9%88%D8%B1

    ReplyDelete